GenLogs
GenLogs is a truck intelligence platform that provides ground-truth data on every motor carrier in America from a nationwide network of proprietary roadside sensors, satellites, and millions of data sources - 4.2 billion commercial-vehicle images with 16 million added daily, covering 97% of active motor carriers. The GenLogs API (https://api.genlogs.io) turns that sensor network into freight intelligence: source and score carriers by lane, verify a carrier was recently sighted along an origin/destination, pull carrier and FMCSA profiles, run carrier-vetting rules, discover shippers by lane and shipper facilities with GeoJSON network maps, manage onboarded-carrier contacts, track mismatch observations, and receive HMAC-SHA512-signed alert webhooks. It serves brokers and shippers, insurance underwriting and claims, law enforcement asset recovery, and carriers. Auth uses an x-api-key plus a short-lived Access-Token, with named per-endpoint permissions.
Real signal across most facets with visible, nameable gaps — the contract exists but is thin, or the portal is good while governance and commercial terms are absent.
API Evangelist profiles GenLogs the way a machine reads it — 27 machine-readable artifacts across 1 API, pulled from the provider's own public surface and indexed so a developer, an analyst, or an AI agent can evaluate it against every other provider on the network.
Every provider in the network is reduced to the same set of machine-readable artifacts — OpenAPI contracts, event specifications, GraphQL schemas, runnable collections, pricing and rate-limit signals, security posture, OAuth scopes, and the agent surfaces (MCP servers and skills) that let software drive the API on its own. We profile them because the interface is the part of a company you can actually inspect: it is a truer signal of what a provider does than any marketing page. From those artifacts we compute the Kin Score — GenLogs scores 44.7/100 (developing), with a separate agent-readiness read of 32/100 (agent ready). The full breakdown is below, followed by every artifact we hold — each card links through to its machine-readable definition on apis.io.
Kin Score
This is the API Evangelist rating — a single, repeatable read computed from the artifacts on this page. Green fill is points earned; the red track is points possible, so every bar shows earned-versus-possible at a glance. Every facet and dimension name is a link: it opens that measurement's page on APIs.io, where the rating runs across the whole catalog — the exact checks that feed it, how every profiled provider distributes on it, and who is at the top of it.
Kin Score
How this is scored →scored 2026-09-08 · rubric v0.20.0
Put this on your own site. The badge is drawn live from GenLogs's current Kin Score — paste it once and it updates itself every time the score is recomputed. It follows your visitor's light or dark setting, and it links back here so anyone who sees it can read the full breakdown.
<!-- Kin Score · API Evangelist -->
<a href="https://providers.apievangelist.com/providers/genlogs/"
title="GenLogs on API Evangelist — API profile and Kin Score">
<img src="https://apis.io/badge/genlogs.svg"
alt="GenLogs Kin Score — API readiness rating by API Evangelist" width="150" height="150" loading="lazy">
</a>[](https://providers.apievangelist.com/providers/genlogs/)<!-- Kin Score · API Evangelist -->
<a href="https://providers.apievangelist.com/providers/genlogs/"
title="GenLogs on API Evangelist — API profile and Kin Score">
<img src="https://apis.io/badge/genlogs/card.svg"
alt="GenLogs Kin Score — API readiness rating by API Evangelist" width="340" height="120" loading="lazy">
</a>More shapes, themes and sizes → · Score as JSON · How badges work
How we profile GenLogs
Each block below is one kind of artifact we hold for GenLogs. For each we say what it is and why it earns a place in the profile, then list every one we've indexed — capped at two rows, scroll within the panel for the rest.
APIs 10
Each API is captured as its own OpenAPI definition — every operation, parameter, and response. This is the single most useful machine-readable description of what an API does, and it's what lets us score, lint, mock, and generate against it without asking the provider for anything.
Individual APIs this provider publishes, each with its own machine-readable definition.
GenLogs Alerts API
The Alerts API from GenLogs — 2 operation(s) for alerts.
GenLogs auth API
Access-token creation and refresh
GenLogs Carrier API
The Carrier API from GenLogs — 3 operation(s) for carrier.
GenLogs carrier-vetting API
Carrier verification and vetting rules
GenLogs Compliance Rules API
The Compliance Rules API from GenLogs — 3 operation(s) for compliance rules.
GenLogs Facilities API
The Facilities API from GenLogs — 2 operation(s) for facilities.
GenLogs Mismatch alerts API
The Mismatch alerts API from GenLogs — 2 operation(s) for mismatch alerts.
GenLogs Onboarded Carriers API
The Onboarded Carriers API from GenLogs — 3 operation(s) for onboarded carriers.
GenLogs Shipper API
The Shipper API from GenLogs — 1 operation(s) for shipper.
GenLogs Webhook Alerts API
The Webhook Alerts API from GenLogs — 3 operation(s) for webhook alerts.
Scroll within the panel for all 10 ·
Open Collections 11
Open, tool-agnostic collections carry the same runnable value as Postman without locking you to one client — the portable, forkable form of the same exercise.
Open, tool-agnostic API collections (OpenAPI-derived and Bruno).
API Collection
OPEN COLLECTIONGenLogs Alerts API
OPEN COLLECTIONGenLogs Alerts auth API
OPEN COLLECTIONGenLogs Alerts Carrier API
OPEN COLLECTIONGenLogs Alerts carrier-vetting API
OPEN COLLECTIONGenLogs Alerts Compliance Rules API
OPEN COLLECTIONGenLogs Alerts Facilities API
OPEN COLLECTIONGenLogs Alerts Mismatch alerts API
OPEN COLLECTIONGenLogs Alerts Onboarded Carriers API
OPEN COLLECTIONGenLogs Alerts Shipper API
OPEN COLLECTIONGenLogs Alerts Webhook Alerts API
OPEN COLLECTIONScroll within the panel for all 11 ·
Event Specifications 2
Not every API is request/response. AsyncAPI describes the event-driven and streaming side — the webhooks and channels — so the asynchronous half of the interface is documented the same way the synchronous half is.
AsyncAPI definitions for this provider's event-driven and streaming APIs.
GenLogs Alert Webhooks
GenLogs delivers alert.matches_found webhook notifications when detection alerts (license plate, VIN, USDOT, etc.) match roadside sensor observations. Payloads are signed with a...
ASYNCAPIGenlogs Webhooks
ASYNCAPIJSON Schema 1
Standalone JSON Schema definitions describe the data models behind the API. We profile them so the shapes are validatable on their own — useful long after a single request is forgotten.
Standalone JSON Schema definitions for this provider's data models.
GenLogs alert.matches_found webhook payload
JSON SCHEMASecurity Posture 2
Authentication, domain security, vulnerability disclosure, and trust-center signals — the evidence that a provider takes security seriously enough to document it. We profile it because you can't govern what you can't see.
Authentication, domain security, vulnerability disclosure, and trust-center signals.
Agentic Access 1
An x-agentic-access contract marks which operations are safe for an agent to run on its own and which need a human in the loop. It is the difference between an API an agent can use and one it can use safely.
Recommended x-agentic-access execution contracts for AI agents.
Resources
Every other property we hold for GenLogs — documentation, portals, status pages, policies, and corporate surface — grouped by the job it does, following the integrator's arc from getting started to running in production.
Get Started 3
Portal, sign-up, and the first successful call
Documentation 2
Reference material describing how the API behaves
Agent Surfaces 4
MCP servers, agent skills, and machine-readable catalogs
Build 2
SDKs, sample code, and the tooling you integrate with
Access & Security 2
Authentication, authorization, and security posture
Operate 2
Status, limits, changes, and where to get help
Commercial 1
Pricing, plans, and the legal terms of use
Company 2
The organization behind the API
Other 2
Properties that don't map to a standard resource type
← All providers · Data indexed from github.com/api-evangelist/genlogs · machine-readable index on apis.io
This is an independent, third-party profile of GenLogs, published by API Evangelist. We do not operate, host, resell, or support these APIs, and we are not affiliated with or endorsed by the company unless stated above. Everything here is built from publicly available information — the company's own site, developer portal, documentation, public repositories, and the specifications it publishes for public use. Nothing is obtained by breaching a system, defeating an access control, or using credentials.
The Kin Score and Agent Readiness rating are independently calculated assessments of a company's public API artifacts, scored against a published rubric. They are not certifications, endorsements, security assessments, or audits.
Corrections, re-scores, and removal are free — no partnership or purchase required, and you do not need to justify the request. A removed company is recorded as unrated, never scored zero for having asked. Acknowledgement within one business day; removal within two.
info@apievangelist.com
·
Read the full data-sourcing policy →
On a security or compliance team? Put security in the subject line and
you will get a person, not a form — we will tell you exactly which public URLs this profile was built from.