Juniper Mist AI
Juniper Mist AI is the AI-driven enterprise networking platform that powers Juniper Networks' AI-Native Networking portfolio. Acquired by Juniper Networks in 2019, Mist pioneered cloud-native, microservices Wi-Fi and extended its AIOps approach across Wired Assurance (EX/QFX switches), WAN Assurance (SSR/SRX gateways), and Access Assurance (cloud NAC). The platform is anchored by Marvis — a conversational virtual network assistant — and the Mist Cloud API, an OpenAPI 3.1 surface of 736 paths and 2832 schemas served across 13 regional clouds (Global, EMEA, APAC, Federal). Real-time event flow ships over WebSocket subscriptions and outbound Webhooks; infrastructure-as-code is supported by an official Terraform provider; and indoor location is delivered through Virtual BLE with native iOS and Android SDKs.
Real signal across most facets with visible, nameable gaps — the contract exists but is thin, or the portal is good while governance and commercial terms are absent.
API Evangelist profiles Juniper Mist AI the way a machine reads it — 240 machine-readable artifacts across 211 APIs, pulled from the provider's own public surface and indexed so a developer, an analyst, or an AI agent can evaluate it against every other provider on the network.
Every provider in the network is reduced to the same set of machine-readable artifacts — OpenAPI contracts, event specifications, GraphQL schemas, runnable collections, pricing and rate-limit signals, security posture, OAuth scopes, and the agent surfaces (MCP servers and skills) that let software drive the API on its own. We profile them because the interface is the part of a company you can actually inspect: it is a truer signal of what a provider does than any marketing page. From those artifacts we compute the Kin Score — Juniper Mist AI scores 45.0/100 (developing), with a separate agent-readiness read of 48/100 (agent ready). The full breakdown is below, followed by every artifact we hold — each card links through to its machine-readable definition on apis.io.
Kin Score
This is the API Evangelist rating — a single, repeatable read computed from the artifacts on this page. Green fill is points earned; the red track is points possible, so every bar shows earned-versus-possible at a glance.
Kin Score
How this is scored →scored 2026-07-27 · rubric v0.5
How we profile Juniper Mist AI
Each block below is one kind of artifact we hold for Juniper Mist AI. For each we say what it is and why it earns a place in the profile, then list every one we've indexed — capped at two rows, scroll within the panel for the rest.
APIs 211
Each API is captured as its own OpenAPI definition — every operation, parameter, and response. This is the single most useful machine-readable description of what an API does, and it's what lets us score, lint, mock, and generate against it without asking the provider for anything.
Individual APIs this provider publishes, each with its own machine-readable definition.
Juniper Mist WebSocket Streaming API
Mist exposes a WebSocket channel for real-time event subscriptions including device events, location updates, presence, RSSI, stats, and Marvis events. Clients authenticate with...
Juniper Mist Webhooks API
Mist Webhooks deliver outbound HTTP POST notifications for events at the Organization or Site scope. Supported topics include audits, alarms, device events, client join/disconne...
Juniper Mist AI Admins API
Admin API calls can be used to create, manage or authenticate Mist administrators. To register administrators into an existing MSP account or Organization, please check: * [Invi...
Juniper Mist AI Admins Login API
Login Endpoints when using Login/Password authentication, with or without 2FA. If the Login/Password authentication is successful, Mist will add a `csrftoken` cookie that must b...
Juniper Mist AI Admins Login - OAuth2 API
A Mist account can be linked to OAuth2 providers: 1. First, login with your Mist account 2. Obtain the Authorization URL for Linking with [Get Oauth 2 Authorization Url for Logi...
Juniper Mist AI Admins Logout API
Logout Endpoints when using Login/Password authentication, with or without 2FA.
Juniper Mist AI Admins Lookup API
Admin Lookup API Call is mainly used by Web UIs to know if a user must be redirected to an SSO URL for login.
Juniper Mist AI Admins Recover Password API
Endpoints used to trigger a password recovery and validate the token sent by email.
Juniper Mist AI Constants Definitions API
API Calls to retrieve constant values that can be used in different parts of the configuration
Juniper Mist AI Constants Events API
API Calls to retrieve the definitions of the Mist events. These definitions are providing example of the Webhook payloads
Juniper Mist AI Constants Models API
API Calls to retrieve the list of Hardware Models and their features
Juniper Mist AI Installer API
In a typical enterprise, a separate group of people, Installers, are responsible for install new devices. May it be a new installation (e.g. new stores), a replacement installat...
Juniper Mist AI MSPs Admins API
An MSP Admin refers to a user who has access to the Juniper Mist managed service provider (MSP) portal and is responsible for managing and administering the network operations o...
Juniper Mist AI MSPs API
MSP (Managed Service Provider) contains multiple Organizations.
Juniper Mist AI MSPs Inventory API
API Calls to locate a device across all the Organizations attached to the MSP account.
Juniper Mist AI MSPs Licenses API
Licenses are a type of service or access that customers can purchase for various features or services offered by a company. Subscriptions can have different statuses, such as ac...
Juniper Mist AI MSPs Logo API
Manage the Mist portal logo at the MSP level. This logo will be displayed instead of the Juniper Mist Logo for all the Organizations attached to this MSP account.
Juniper Mist AI MSPs Logs API
Audit Logs are records of activities initiated by users, providing a history of actions such as accessing, creating, updating, or deleting resources or components at the MSP lev...
Juniper Mist AI MSPs Marvis API
Marvis is an AI-driven, interactive virtual network assistant that streamlines network operations, simplifies troubleshooting, and provides an enhanced user experience. It offer...
Juniper Mist AI MSPs Org Groups API
Org Groups a way to group Organizations together based on certain criteria. They can be used for easier management and organization of multiple organizations within the MSP portal.
Juniper Mist AI MSPs Orgs API
An organization usually represents a customer - which has inventories, licenses. An Organization can contain multiple sites. A site usually represents a deployment at the same l...
Juniper Mist AI MSPs SLEs API
SLEs, or Service-Level Expectations, are metrics used to monitor and report on the user experience of a Wireless, Wired or Wan network. They are generated through data science a...
Juniper Mist AI MSPs SSO API
MSP SSO, or Single Sign-On, is a method of authentication that allows users to securely log in to multiple applications and websites with a single set of login credentials. It i...
Juniper Mist AI MSPs SSO Roles API
MSP SSO roles refer to the different functions assigned to users within a Single Sign-On (SSO) system. These roles determine the tasks and actions that users can perform within ...
Juniper Mist AI MSPs Tickets API
Support tickets are a means for users to seek assistance and resolve issues they encounter with a product or service. They allow users to communicate their problems or questions...
Juniper Mist AI Orgs Admins API
An org admin, or organization administrator, is a user with administrative privileges within a specific organization. They have the authority to manage and oversee the operation...
Juniper Mist AI Orgs Advanced Anti Malware Profiles API
The "Advanced Anti-Malware" feature in Sky ATP is a comprehensive security solution that leverages multiple techniques to detect and prevent malware attacks. Here are the key co...
Juniper Mist AI Orgs Alarm Templates API
An Alarm Template is a set of Alarm Rules that could be applied to one or more sites (while each site can only pick one Alarm Template), or to the whole org. Once created, the A...
Juniper Mist AI Orgs Alarms API
Alarms are triggered based on certain events. Alarms could be configured using an Alarm Template.
Juniper Mist AI Orgs Antivirus Profiles API
Antivirus profiles are used to define the content to scan for any malware and the action to be taken when malware is detected. These profiles can be assigned to Content Security...
Juniper Mist AI Orgs AP Templates API
AP Templates are defining Wi-Fi and AP settings that can be assigned to Access Points based on different types of rules. AP Templates must be assigned to one or multiple sites t...
Juniper Mist AI Orgs API
An organization usually represents a customer - which has inventories, licenses. An Organization can contain multiple sites. A site usually represents a deployment at the same l...
Juniper Mist AI Orgs API Tokens API
Org API token is a unique identifier used by an application to authenticate and access a service's API. These tokens are used to authenticate requests made to the API server and...
Juniper Mist AI Orgs Asset Filters API
An Asset Filter is a feature that allows users to define specific criteria or conditions to filter and display only certain assets based on their attributes or properties. This ...
Juniper Mist AI Orgs Assets API
An Asset refers to any equipment or item that is being tracked and monitored using Bluetooth Low Energy (BLE) beacon tags. This requires the Asset Visibility subscription.
Juniper Mist AI Orgs Cert API
API Calls to manage Organization Certificates. The certificates can be used bu Access Assurance, during the SSO/SAML Authentication, ...
Juniper Mist AI Orgs Clients - Marvis API
Marvis Invites can be generated for (and belongs to) an Org. They can be generated by an Admin of an Org and can be revoked at anytime. Marvis Clients are devices that have the ...
Juniper Mist AI Orgs Clients - NAC API
NAC Clients are devices connected to the network and authenticated by Juniper Mist Access Assurance.
Juniper Mist AI Orgs Clients - SDK API
SDK Clients are devices that have installed an application using the Mist Software Development Kit (SDK). These clients can provide specific data and information that is not ava...
Juniper Mist AI Orgs Clients - Wan API
WAN Clients are devices connected to a Juniper SRX or SSX gateway monitor or managed by Mist
Juniper Mist AI Orgs Clients - Wired API
Wired Clients are Wired devices connected to a Juniper switch monitored or managed by Mist.
Juniper Mist AI Orgs Clients - Wireless API
Wireless Clients are Wi-Fi devices connected to a Juniper Mist Access Point.
Juniper Mist AI Orgs CRL API
CRLs, or Certificate Revocation Lists, are time-stamped lists that identify digital certificates that have been invalidated before their expiration date. They include informatio...
Juniper Mist AI Orgs Device Profiles API
While Templates / RF Templates / Network Templates / Gateway Templates provides powerful ways to control how a Device\'s configuration is derived for a Site. There are cases whe...
Juniper Mist AI Orgs Devices - AOS API
API Calls specific to AOS (Aruba Operating System) devices
Juniper Mist AI Orgs Devices API
Devices are any Network device managed or monitored by Juniper Mist. It can be * Wireless Access Points * Juniper Switch (EX, QFX) * Juniper WAN Gateway (SRX, SSR) * Mist Edges ...
Juniper Mist AI Orgs Devices - Others API
API Call for 3rd party devices
Juniper Mist AI Orgs Devices - SSR API
API Calls specific to SSR devices
Juniper Mist AI Orgs Events API
Orgs Events are all the system level changes at the org level
Juniper Mist AI Orgs EVPN Topologies API
EVPN allows an alternative but more efficient LAN architecture utilizing VxLAN / MP-BGP - separating control plane (MAC / IP Learning) from forwarding plane. In our implementati...
Juniper Mist AI Orgs Gateway Templates API
Gateway Template is applied to a site for gateway(s) in a site. When Templates are not used, Site Setting holds settings for multiple device types and they can differ to set dev...
Juniper Mist AI Orgs Guests API
Guests are users who are accessing the wi-fi network as a temporary or non-permanent visitor.
Juniper Mist AI Orgs IDP Profiles API
An IDP profile is a set of predefined rules and actions that determine how the Intrusion Detection and Prevention (IDP) system handles network traffic. It allows you to selectiv...
Juniper Mist AI Orgs Integration Cradlepoint API
The integration between Mist and Cradlepoint allows users to utilize Cradlepoint 5G cellular adapters with Juniper's wired, wireless, and SD-WAN solutions driven by Mist AI. Wit...
Juniper Mist AI Orgs Integration JSE API
JSE stands for Juniper Secure Edge and it is a feature within the Mist UI that allows customers to configure Secure Cloud Connectors. With JSE, users can establish a tunnel via ...
Juniper Mist AI Orgs Integration Juniper API
The Juniper Integration can be used to synchronize Juniper Support Insights (JSI) information.
Juniper Mist AI Orgs Integration SkyATP API
Sky Advanced Threat Prevention (Sky ATP) is a cloud-based security designed to detect and mitigate advanced threats in real-time, ensuring the security and integrity of your net...
Juniper Mist AI Orgs Integration Zscaler API
In Zscaler UI: 1. add Partner Integration at https://admin.zscalerbeta.net/#administration/partner-integration 2. Add Partner Administrator Role at https://admin.zscalerbeta.net...
Juniper Mist AI Orgs Inventory API
The Org Inventory allows administrators to view and manage all devices registered (claimed) to the Organization.
Juniper Mist AI Orgs JSI API
Juniper Support Insight is a free service provided to all Mist customers. You can adopt your devices via a few lines CLI commands. Allowing you to * get some basic information a...
Juniper Mist AI Orgs Licenses API
Licenses are a type of service or access that customers can purchase for various features or services offered by a company. Subscriptions can have different statuses, such as ac...
Juniper Mist AI Orgs Linked Applications API
Linked Application are Third party applications linked to the Mist Organization. This is usually using OAuth2.0 or API integrations for a Cloud-to-Cloud Communication.
Juniper Mist AI Orgs Logs API
Audit Logs are records of activities initiated by users, providing a history of actions such as accessing, creating, updating, or deleting resources or components at the Org lev...
Juniper Mist AI Orgs Maps API
These API Calls to import Site Maps at the Org level
Juniper Mist AI Orgs Marvis API
Marvis is an AI-driven, interactive virtual network assistant that streamlines network operations, simplifies troubleshooting, and provides an enhanced user experience. It offer...
Juniper Mist AI Orgs Marvis Invites API
Marvis Clients are devices that have the Marvis Android Client installed on them and are connected to a Juniper Mist AP. They provide detailed data and telemetry about the clien...
Juniper Mist AI Orgs MxClusters API
A Mist Edge Cluster (MxCluster) is a group of Juniper Mist Edge devices that are configured to work together in order to provide high availability and load balancing for the tun...
Juniper Mist AI Orgs MxEdges API
A Mist Edge (MxEdge) is a physical or virtual appliance that is deployed in a network to provide centralized data path for user traffic or as a RADIUS Proxy, which was tradition...
Juniper Mist AI Orgs MxTunnels API
A Mist Tunnel (MxTunnel) is a configuration object that allows for the tunneling of user VLANs from the Access Points (APs) to a central point on the network. It specifies the V...
Juniper Mist AI Orgs NAC CRL API
By default, Mist is automatically retrieving the PKI CRL by using the CRL Distribution Point provided by Certification Authority. In case this information is not provided, or th...
Juniper Mist AI Orgs NAC IDP API
The NAC IDP allows users to integrate with various Identity Providers (IDPs) to enhance authentication and access control. Admins can configure identity providers such as micros...
Juniper Mist AI Orgs NAC Portals API
NAC Portals are for onboard Wireless and Wired client with 802.1X The NAC Portal is a web-based interface that allows users to authenticate and gain access to the network. It is...
Juniper Mist AI Orgs NAC Rules API
The NAC Rules (or Auth Policies) are a set of rules that devices and users must fulfill in order to gain access to the network and use network resources. Juniper Mist Access Ass...
Juniper Mist AI Orgs NAC Tags API
NAC Tags are the building blocks to compose nacrules. They can either appear in the "matching" / "not_matching" sections of a nacrule, in which case they play the role of classi...
Juniper Mist AI Orgs Network Templates API
A Network Template is a configuration template that allows for the consistent and standardized configuration of switches across an organization's network infrastructure. It incl...
Juniper Mist AI Orgs Networks API
A Network refers to a group or segment of users that are defined for use across the entire organization.
Juniper Mist AI Orgs Premium Analytics API
Premium Analytics is an advanced, cloud-based analytics service offered by Juniper Mist. It provides end-to-end network observability and allows users to gain unique insights in...
Juniper Mist AI Orgs Psk Portals API
PSK Self-Service Portals are for 1. **Wi-Fi users** who want to connect to a WLAN with personal PSK, they're told to connect to a URL where they can login (likely through compan...
Juniper Mist AI Orgs Psks API
A multi PSK (Pre-Shared Key) is a feature that allows the use of multiple PSKs for securing network connections. It provides a simple and comprehensive way to onboard client dev...
Juniper Mist AI Orgs Reports API
API Calls to manage organization-level reports, such as E911 AP BSSID report exports.
Juniper Mist AI Orgs RF Templates API
Rf Templates are a feature in Juniper Mist wireless assurance that allow for uniform radio configurations to be applied across all sites in an organization. These templates can ...
Juniper Mist AI Orgs SCEP API
The Orgs SCEP API from Juniper Mist AI — 3 operation(s) for orgs scep.
Juniper Mist AI Orgs SDK Invites API
SDK Invites can be generated for (and belongs to) an Org. They can be generated by an Admin of an Org and can be revoked at anytime.
Juniper Mist AI Orgs SDK Templates API
The Orgs SDK Templates API from Juniper Mist AI — 2 operation(s) for orgs sdk templates.
Juniper Mist AI Orgs SecIntel Profiles API
Sky ATP Secintel Profile
Juniper Mist AI Orgs Security Policies API
Security Policy is designed to audit / catch discrepancies between "what's intended to be running" versus "what's actually running" in a network. Many big organizations have sep...
Juniper Mist AI Orgs Service Policies API
Services Policies are a security policy that defines who can access applications, they are used to control access to applications and ensure proper traffic management within a n...
Juniper Mist AI Orgs Services API
A Service refers to the applications that network users will connect to. These applications represent traffic destinations and are essential for defining network policies and se...
Juniper Mist AI Orgs Setting API
API Calls to manage the Mist Organization Settings
Juniper Mist AI Orgs Site Templates API
Site templates are pre-configured sets of attributes and settings that can be applied to one or more sites in a Mist Organization. These templates allow for quick and consistent...
Juniper Mist AI Orgs Sitegroups API
Site groups are a group of sites under the same Org. It's many-to-many mapping to sites
Juniper Mist AI Orgs Sites API
API Calls to Create or Get the Organization Sites. Use the [Site Settings](https://www.juniper.net/documentation/us/en/software/mist/api/http/api/sites/setting/overview) to conf...
Juniper Mist AI Orgs SLEs API
Org SLEs, or Service-Level Expectations, are metrics used to monitor and report on the user experience of a Wireless, Wired or Wan network. They are generated through data scien...
Juniper Mist AI Orgs SSO API
Org SSO, or Single Sign-On, is a method of authentication that allows users to securely log in to multiple applications and websites with a single set of login credentials. It i...
Juniper Mist AI Orgs SSO Roles API
SSO roles refer to the different functions assigned to users within a Single Sign-On (SSO) system. These roles determine the tasks and actions that users can perform within the ...
Juniper Mist AI Orgs Stats API
API Calls to retrieve statistics about the Mist Org and related items
Juniper Mist AI Orgs Stats - Assets API
API Calls to retrieve statistics about the Assets at the Org level
Juniper Mist AI Orgs Stats - BGP Peers API
API Calls to retrieve statistics about the BGP Peers (WAN Assurance)
Juniper Mist AI Orgs Stats - Devices API
API Calls to retrieve statistics about the Mist Managed and Monitored Devices at the Org level By default, the API call only returns a subset of the available fields. Additional...
Juniper Mist AI Orgs Stats - MxEdges API
API Calls to retrieve statistics about the Mist Edges at the Org level
Juniper Mist AI Orgs Stats - Ospf API
API Calls to retrieve statistics about OSPF peers at the Org level
Juniper Mist AI Orgs Stats - Other Devices API
API Calls to retrieve statistics about the Other/3rd party devices at the Org level
Juniper Mist AI Orgs Stats - Ports API
API Calls to retrieve statistics about the Wired Ports at the Org level
Juniper Mist AI Orgs Stats - Sites API
API Calls to retrieve statistics about the Organization Sites
Juniper Mist AI Orgs Stats - Tunnels API
API Calls to retrieve statistics about the Mist Tunnels at the Org level
Juniper Mist AI Orgs Stats - VPN Peers API
API Calls to retrieve statistics about the VPN Peers (WAN Assurance)
Juniper Mist AI Orgs Tickets API
Support tickets are a means for users to seek assistance and resolve issues they encounter with a product or service. They allow users to communicate their problems or questions...
Juniper Mist AI Orgs UI Settings API
The Org UI Settings are used to configure the MArvis dashboards
Juniper Mist AI Orgs User MACs API
NAC User MACs (Endpoints) provide a database of endpoints identified by their MAC addresses. They can be used assign each endpoint with various attributes, such as name, VLAN, r...
Juniper Mist AI Orgs Vars API
Vars endpoints are used to retrieve the list of Site Variables across all the Sites.
Juniper Mist AI Orgs VPNs API
VPNs endpoints are used to create the WAN Assurance Overlay configuration between a Hub and one or multiple WAN Edge Gateways. When configuring the Hub and Spokes from the Mist ...
Juniper Mist AI Orgs Webhooks API
An Org Webhook is a configuration that allows real-time events and data from the Org to be pushed to a provided url. It enables the collection of information about various topic...
Juniper Mist AI Orgs WLAN Templates API
A WLAN template is a collection of WLAN policies, Tunneling Policies, and WxLAN policies. It is used for creating and managing WLAN configurations at an organizational level. WL...
Juniper Mist AI Orgs Wlans API
An Org Wlan is a wireless local area network that is configured at the Org level and applied to a WLAN template. It allows for the creation and management of wireless network se...
Juniper Mist AI Orgs WxRules API
ORg WxRules are a set of rules, restrictions, and settings that can be applied to WLANs within a specific WLAN Template. These policies determine how the devices and traffic are...
Juniper Mist AI Orgs WxTags API
Wxtags are tags or groups that can be created and used within the Org. They are used to classify users and resources and can be applied to Access Points, WLAN configurations or ...
Juniper Mist AI Orgs WxTunnels API
A WxLan Tunnel (WxTunnel) are used to create a secure connection between Juniper Mist Access Points and third-party VPN concentrators using protocols such as L2TPv3 or dmvpn. Th...
Juniper Mist AI Self Account API
API calls related to the currently connected user account.
Juniper Mist AI Self Alarms API
API calls related to the alarm subscriptions for the currently connected user account.
Juniper Mist AI Self API Token API
Like many other API providers, it's also possible to generate API Tokens to be used (in HTTP Header) for authentication. An API token ties to a Admin with equal or less privileg...
Juniper Mist AI Self Audit Logs API
API calls related to the audit logs subscriptions for the currently connected user account.
Juniper Mist AI Self MFA API
API calls related to Two Factor Authentication for the currently connected user account.
Juniper Mist AI Self OAuth2 API
A Mist account can be linked to OAuth2 providers: 1. First, login with your Mist account 2. Obtain the Authorization URL for Linking 3. Obtain the authorization code by clicking...
Juniper Mist AI Sites Advanced Anti Malware Profiles API
The API Endpoints for the Advanced Anti Malware Profiles at the site level can be used to get the site derived profiles, meaning the org level configuration with the site variab...
Juniper Mist AI Sites Alarms API
Alarms are triggered based on certain events. Alarms could be configured using an [Orgs Alarm Template]($h/Orgs%20Alarm%20Templates/_overview).
Juniper Mist AI Sites Anomaly API
The Sites Anomaly API from Juniper Mist AI — 3 operation(s) for sites anomaly.
Juniper Mist AI Sites Antivirus Profiles API
The API Endpoints for the Antivirus Profiles at the site level can be used to get the site derived profiles, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites AP Templates API
AP Templates are defining Wi-Fi and AP settings that can be assigned to Access Points based on different types of rules. Site AP Templates are created and managed at the site le...
Juniper Mist AI Sites API
A site represents a project, a deployment. For MSP, it can be as small as a coffee shop or a five-star 600-room hotel. A site contains a set of Maps, Wlans, Policies, Zones.
Juniper Mist AI Sites Applications API
Applications contains a list of applications users are interested in monitoring / routing / policing
Juniper Mist AI Sites Asset Filters API
An Asset Filter is a feature that allows users to define specific criteria or conditions to filter and display only certain assets based on their attributes or properties. Site ...
Juniper Mist AI Sites Assets API
An Asset refers to any equipment or item that is being tracked and monitored using Bluetooth Low Energy (BLE) beacon tags. This requires the Asset Visibility subscription.
Juniper Mist AI Sites Auto Map Assignment API
Auto Map Assignment allows devices to be automatically assigned to maps based on their location data. These API calls can be used to manage, apply, and clear auto map assignment...
Juniper Mist AI Sites Beacons API
The Sites Beacons API from Juniper Mist AI — 2 operation(s) for sites beacons.
Juniper Mist AI Sites Clients - NAC API
NAC Clients are devices connected to the network and authenticated by Juniper Mist Access Assurance.
Juniper Mist AI Sites Clients - Wan API
WAN Clients are devices connected to a Juniper SRX or SSX gateway monitor or managed by Mist
Juniper Mist AI Sites Clients - Wired API
Wired Clients are Wired devices connected to a Juniper switch monitored or managed by Mist.
Juniper Mist AI Sites Clients - Wireless API
Wireless Clients are Wi-Fi devices connected to a Juniper Mist Access Point.
Juniper Mist AI Sites Device Profiles API
The API Endpoints for the Device Profiles at the site level can be used to get the site derived networks, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites Devices API
Mist provides many ways (device_type specific template, site template, device profile, per-device) to configure devices for different kind of scenarios. The precedence goes from...
Juniper Mist AI Sites Devices - Others API
API Call for 3rd party devices
Juniper Mist AI Sites Devices - WAN Cluster API
API Calls specific to manage (form/delete) the SRX/SSR Clusters
Juniper Mist AI Sites Devices - Wired API
API Calls specific to the Juniper Switches managed by Mist
Juniper Mist AI Sites Devices - Wired - Virtual Chassis API
API Calls specific to the Juniper Switches Virtual Chassis managed by Mist
Juniper Mist AI Sites Devices - Wireless API
API Calls specific to the Mist Access Points
Juniper Mist AI Sites Events API
Site events are issues or incidents that affect site-assigned access points (aps) and radius, dhcp, and dns servers. They can be investigated and monitored using the insights da...
Juniper Mist AI Sites EVPN Topologies API
EVPN allows an alternative but more efficient LAN architecture utilizing VxLAN / MP-BGP - separating control plane (MAC / IP Learning) from forwarding plane. In our implementati...
Juniper Mist AI Sites Gateway Templates API
The API Endpoints for the Gateway Templates at the site level can be used to get the site derived networks, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites Guests API
Guests are users who are accessing the wi-fi network as a temporary or non-permanent visitor.
Juniper Mist AI Sites IDP Profiles API
The API Endpoints for the IDP Profiles at the site level can be used to get the site derived profiles, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites Insights API
Insights is a feature that provides an overview of network experience across the entire site, access points, or clients. It offers useful information about current conditions, s...
Juniper Mist AI Sites JSE API
JSE stands for Juniper Secure Edge and it is a feature within the Mist UI that allows customers to configure Secure Cloud Connectors. With JSE, users can establish a tunnel via ...
Juniper Mist AI Sites Licenses API
The API Endpoints for the Licenses at the site level can be used to get license usages for a specific site.
Juniper Mist AI Sites Location API
The Location Diagnostics allows users to retrieve and analyze coverage and performance data for mist access points (aps) and devices.
Juniper Mist AI Sites Map Stacks API
Map Stacks are a way to group multiple maps together within a site, typically representing different floors or levels in a building. Map Stacks help organize and manage floorpla...
Juniper Mist AI Sites Maps API
A Site Map is a visual representation of the layout and structure of a location, such as a building or campus. It includes accurate information about the placement, positions, h...
Juniper Mist AI Sites Maps - Auto-placement API
### AP Auto-Placement AP Auto-Placement is a feature in Juniper Mist wireless assurance that automatically determines and sets the positions of Access Points (APs) on a floorpla...
Juniper Mist AI Sites Maps - Auto-Zone API
The auto zones service is a map parsing service that uses map image data to suggest spaces to designate as location zones.
Juniper Mist AI Sites MxEdges API
MxEdges (Mist Edges) at the site level are deployed to tunnel traffic at each site due to network constraints or security concerns. They can be assigned to a specific site and c...
Juniper Mist AI Sites NAC Fingerprints API
The NAC IDP allows users to integrate with various Identity Providers (IDPs) to enhance authentication and access control. Admins can configure identity providers such as micros...
Juniper Mist AI Sites Network Templates API
The API Endpoints for the Network Templates at the site level can be used to get the site derived networks, meaning the org level configuration with the site variables resolved.
Juniper Mist AI Sites Networks API
The API Endpoints for the Networks at the site level can be used to get the site derived networks, meaning the org level configuration with the site variables resolved.
Juniper Mist AI Sites Psks API
A multi PSK (Pre-Shared Key) is a feature that allows the use of multiple PSKs for securing network connections. It provides a simple and comprehensive way to onboard client dev...
Juniper Mist AI Sites RF Templates API
The API Endpoints for the RF Templates at the site level can be used to get the site derived configuration, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites Rfdiags API
Rf Diags is a feature in Juniper Mist location services that allows users to replay recorded sessions of the RF (radio frequency) environment. It enables users to gain an unders...
Juniper Mist AI Sites Rogues API
Rogues are unauthorized wireless access points that are installed on a network without authorization. They can be connected to the LAN via an ethernet cable, similar to a pc, an...
Juniper Mist AI Sites RRM API
RRM, or Radio Resource Management, is a tool used by large multi-site organizations to efficiently manage their RF spectrum. It involves making decisions on channel and power se...
Juniper Mist AI Sites RSSI Zones API
RSSI Zones are zones based on the RSSI (Received Signal Strength Indicator, i.e. the power of the signal received by the Access Points from the Wireless Clients).
Juniper Mist AI Sites SecIntel Profiles API
Sky ATP Secintel Profile
Juniper Mist AI Sites Service Policies API
The API Endpoints for the Service Policies at the site level can be used to get the site derived configuration, meaning the merge between the site level configuration and the or...
Juniper Mist AI Sites Services API
A Service represents an a traffic destination or an application that network users connect to. They are associated with users and networks and are used in application policies t...
Juniper Mist AI Sites Setting API
Site settings refer to the configuration and management of of site within a Mist Organization. These settings include access point settings, firmware upgrade schedules, and vari...
Juniper Mist AI Sites Site Templates API
The API Endpoints for the Site Templates at the site level can be used to get the site derived configuration, meaning the org level configuration with the site variables resolved..
Juniper Mist AI Sites Skyatp API
SkyATP is a cloud-based solution that provides advanced threat protection for network security. It allows security analysts to update their defense against new attack techniques...
Juniper Mist AI Sites SLEs API
Site SLEs, or Service-Level Expectations, are metrics used to monitor and report on the user experience of a Wireless, Wired or Wan network. They are generated through data scie...
Juniper Mist AI Sites Spectrum Analysis API
The Spectrum Analysis feature provides insights into the radio frequency environment, helping to identify interference and optimize wireless network performance. It allows users...
Juniper Mist AI Sites Stats API
The stats are providing access to raw data about a specific type of entities.
Juniper Mist AI Sites Stats - Apps API
API Calls to retrieve the stats of the Applications used on side
Juniper Mist AI Sites Stats - Assets API
The Sites Stats - Assets API from Juniper Mist AI — 7 operation(s) for sites stats - assets.
Juniper Mist AI Sites Stats - Beacons API
The Sites Stats - Beacons API from Juniper Mist AI — 1 operation(s) for sites stats - beacons.
Juniper Mist AI Sites Stats - BGP Peers API
API Calls to retrieve BGP Peers statistics of the Site Wen Edge Gateways at the Site level
Juniper Mist AI Sites Stats - Calls API
API Calls to retrieve the stats of the calls (Zoom/Teams) detected by Mist
Juniper Mist AI Sites Stats - Clients SDK API
SDK Clients are devices that have installed an application using the Mist Software Development Kit (SDK). These clients can provide specific data and information that is not ava...
Juniper Mist AI Sites Stats - Clients Wireless API
API Calls to retrieve the stats of the wireless clients detected (connected or not connected) on this site.
Juniper Mist AI Sites Stats - Devices API
API Calls to retrieve statistics about the Mist Managed and Monitored Devices at the Site level
Juniper Mist AI Sites Stats - Discovered Switches API
API Calls to retrieve statistics about the Discovered Switches at the Site level
Juniper Mist AI Sites Stats - IoT Endpoints API
API Calls to retrieve IoT Endpoint statistics for the current Site
Juniper Mist AI Sites Stats - MxEdges API
API Calls to retrieve statistics about the Mist Edges at the Site level
Juniper Mist AI Sites Stats - Ospf API
API Calls to retrieve statistics about OSPF peers at the Site level
Juniper Mist AI Sites Stats - Ports API
API Calls to retrieve statistics about the Wired Ports at the Site level
Juniper Mist AI Sites Stats - WxRules API
API Calls to retrieve WxRules statistics for the current Site
Juniper Mist AI Sites Stats - Zones API
API Calls to retrieve Zones statistics for the current Site
Juniper Mist AI Sites Synthetic Tests API
Synthetic Tests (Marvis Minis) are a feature of Juniper Networks' Mist platform, designed to proactively identify and resolve network issues before they impact users by simulati...
Juniper Mist AI Sites UI Settings API
The Site UI Settings are used to configure the site Network and Analytics reports
Juniper Mist AI Sites vBeacons API
A vBeacon is a virtual beacon that is created and configured on a floorplan and are configured with a name and message It is a Mist patented technology that provides proximity-r...
Juniper Mist AI Sites VPNs API
API Calls to retrieve the list of Org VPNs configuration available for the Site
Juniper Mist AI Sites WAN Usages API
API Calls to retrieve WAN Assurance statistics about the WAN Usage
Juniper Mist AI Sites Webhooks API
A Site Webhook is a configuration that allows real-time events and data from a specific site to be pushed to a provided url. It enables the collection of information about vario...
Juniper Mist AI Sites Wlans API
A Site Wlan is a wireless local area network that is configured and applied to a specific site within an organization. It allows for the creation and management of wireless netw...
Juniper Mist AI Sites WxRules API
Site WxRules are a set of rules, restrictions, and settings that can be applied to WLANs within a specific site. These policies determine how the devices and traffic are treated...
Juniper Mist AI Sites WxTags API
Wxtags are tags or groups that can be created and used within a specific site. They are used to classify users and resources and can be applied to Access Points, WLAN configurat...
Juniper Mist AI Sites WxTunnels API
A WxLan Tunnel (WxTunnel) are used to create a secure connection between Juniper Mist Access Points and third-party VPN concentrators using protocols such as L2TPv3 or dmvpn. Th...
Juniper Mist AI Sites Zones API
A Zone is a custom area defined by a user on a floor plan. Zones can be used for capturing entry and exit events of clients, assets, and sdk clients, providing insights such as ...
Juniper Mist AI Utilities Common API
API Calls to use Devices Troubleshooting tools. Some API Calls can be used with any type of devices (Access Points, Switches and Gateways), and some others may be limited to som...
Juniper Mist AI Utilities LAN API
API Calls to use Devices Troubleshooting tools specific to Wired Assurance
Juniper Mist AI Utilities Location API
API Calls to use Devices Troubleshooting tools specific to Asset Tracking and User Management
Juniper Mist AI Utilities MxEdge API
API Calls to use Devices Troubleshooting tools specific to Mx Edges
Juniper Mist AI Utilities PCAPs API
API Calls to start, stop or managed Packet Captures at the device level
Juniper Mist AI Utilities Upgrade API
API Calls used to manage device upgrades for a single device, at the site level or at the organization level.
Juniper Mist AI Utilities WAN API
API Calls to use Devices Troubleshooting tools specific to WAN Assurance
Juniper Mist AI Utilities Wi-Fi API
API Calls to use Devices Troubleshooting tools specific to Wireless Assurance
Scroll within the panel for all 211 ·
Open Collections 1
Open, tool-agnostic collections carry the same runnable value as Postman without locking you to one client — the portable, forkable form of the same exercise.
Open, tool-agnostic API collections (OpenAPI-derived and Bruno).
Mist API
OPEN COLLECTIONFeatures 25
The notable capabilities this provider advertises, captured as structured features so they can be searched and compared instead of read one landing page at a time.
Notable capabilities this provider offers.
Scroll within the panel for all 25 ·
Security Posture 2
Authentication, domain security, vulnerability disclosure, and trust-center signals — the evidence that a provider takes security seriously enough to document it. We profile it because you can't govern what you can't see.
Authentication, domain security, vulnerability disclosure, and trust-center signals.
Agentic Access 1
An x-agentic-access contract marks which operations are safe for an agent to run on its own and which need a human in the loop. It is the difference between an API an agent can use and one it can use safely.
Recommended x-agentic-access execution contracts for AI agents.
Resources
Every other property we hold for Juniper Mist AI — documentation, portals, status pages, policies, and corporate surface — grouped by the job it does, following the integrator's arc from getting started to running in production.
Get Started 3
Portal, sign-up, and the first successful call
Documentation 7
Reference material describing how the API behaves
Scroll within the panel for all 7 ·
Agent Surfaces 1
MCP servers, agent skills, and machine-readable catalogs
Build 14
SDKs, sample code, and the tooling you integrate with
Scroll within the panel for all 14 ·
Access & Security 2
Authentication, authorization, and security posture
Learn 2
Tutorials, courses, talks, and written guidance
Operate 4
Status, limits, changes, and where to get help
Commercial 2
Pricing, plans, and the legal terms of use
Company 3
The organization behind the API
← All providers · Data indexed from github.com/api-evangelist/mist-ai · machine-readable index on apis.io